Feider Machines FRT7550M, Original Instruction

Page: 11 / 63

11
ASSEMBLY
SEAT INSTALLATION
Use the fasteners shown below to assemble the seat . Fasteners are
exposed in real size.
1. Carefully remove the plastic packaging from the seat .
2. Lift
the seat support and secure in STAND-UP position with the seat
support bar .
3. Align the
seat c with those of the seat bracket (Fig. 1). Secure the
seat to its bracket using the brackets as shown.
4. Check the operating position of the seat . If the seat needs to be
adjusted, release the two wing nuts (A) . Slide the seat forward or
backward along the adjustment cavities as shown. Tighten the wing
nuts (A) again.
_________________________________________________________________
STEERING WHEEL INSTALLATION
Assemble the steering wheel as shown below:
1. Make sure the front wheels are in position.
2. Slide the tube in the console (Figure 2). Make sure
you have that the end of the tube adjusts to the steering ring.
3. Slide the steering wheel and seat bar in the tube and console .
Press the steering wheel . The seat bar locks into the gearwheel
pinion. Pull the steering wheel .
Ensure that the seat bar is locked in place .