Feider Machines FRT7550M, Original Instruction

Page: 13 / 63

13
ASSEMBLY
IMPORTANT! IMPORTANT! BEFORE STARTING
MOWING
□
Check the oil level in the crankcase
□
Fill up the fuel tank
□
Check the level of the mower crankcase
□
Check the tire pressure
□
Make sure that the battery cables are connected
CAUTION: before assembling or servicing the mower,
please disconnect it.
NOTE: In this instruction manual, left and right describe the
location of a part in relation to the riding driver.
_________________________________________________________________
BEFORE STARTING UP
NOTE: The engine was supplied by the manufacturer with oil
included. Check the oil level. Add oil if needed.
See engine manufacturer's instructions for the type of fuel and oil to be
used. Before using the unit, read the information on safety, handling,
maintenance and storage.
CAUTION: follow the engine manufacturer's instructions
for the type of fuel and oil to be used. Always use a
secure fuel container. Do not smoke when refuelling. Do
not refuel in an enclosed area. Before refuelling, turn off
the engine. Let the engine cool for a few minutes.
IMPORTANT: This unit is equipped with an internal combustion engine
and should not be used on or close to plots.
_________________________________________________________________
LEVEL CHECK
OF THE MOWER FRAME
Ensure that the cutting level remains correct. After mowing a small
area, examine it. If the mower frame does not cut in levelled mode, see
the Instructions for "Checking the levelling of the mower frame" in the
Maintenance section of this instruction manual.
_________________________________________________________________
TIRE CHECK
Check the tire pressure Too high a pressure will cause the unit to
operate chaotically. Similarly, incorrect pressure prevents the mower
frame from cutting in levelled mode. The correct pressure (PSI) is 14
PSI (1 BAR). The tires have to be inflated during transport.