![background image](http://html.mh-extra.com/html/federal-signal-corporation/leach-2r-iii/leach-2r-iii_service-manual_548517033.webp)
OPERATION
4. Make sure the tailgate clamps are in the closed posi-
tion and securely tightened.
5. Check the hydraulic tank gauge to make sure the
fluid is in the “safe” range. Add fluid, if necessary. (See
SECTION 5, SPECIFICATIONS for the correct type of
fluid to use.) The pushout cylinder must be retracted,
the tailgate down, the carrier and packer panels in the
“interrupted cycle” position to check the hydraulic fluid
level.
6. Make sure all operating levers are in the neutral posi-
tion.
Check:
a. Packer panel lever;
b. Carrier panel lever;
c. Pushout lever;
d. Tailgate lift lever.
Never operate the 2R-III with any part of the control
system or levers removed or serious damage will
result.
Never under any circumstances enter the body if
the truck is running. Open the packer panel and
release the pushout panel cylinder pressure before
entering the body. Always make sure the truck en-
gine is off and the keys are in your pocket before
entering the body.
1 1/2"
PACKER PANEL
LEVER
CARRIER
PANEL
LEVER
TAILGATE CLAMPS
SECTION 3
3-7
ENGINE SPEED UP
BUTTON
PUSHOUT LEVER
FRONT
CONTROL
VALVE
TAILGATE
LIFT
LEVER
Summary of Contents for LEACH 2R-III
