![background image](http://html.mh-extra.com/html/federal-signal-corporation/leach-2r-iii/leach-2r-iii_service-manual_548517104.webp)
SECTION 9
9-9
SERVICE AND REPAIR
REMOVAL OF CARRIER PANEL
CYLINDERS
OPERATIONAL STATUS
Truck Off
PTO Disengaged
OPERATIONAL STATUS
Truck Running
PTO Engaged
Speed Up On
Remove the top sheet to provide better accessibil-
ity. Remove two capscrews (1), lockwashers (2) and
spacer (3) securing the upper track hole cover (4)
and remove the upper covers from each side of the
tailgate.
Shift the carrier panel lever and cycle the unit until
the roller assembly on the upper end of the carrier
panel is in line with the open upper track hole.
1.
2.
CARRIER
PANEL
LEVER
1
2
3
4
OPERATIONAL STATUS
Truck Off
PTO Disengaged
NOTE:
See Sec. 4, GENERAL REPAIR PRACTICES, for more
detailed information about the correct use of slings and
lifting chains.
Secure chains or a sling to the upper and lower end
of the carrier panel. Attach the other end to a suit-
able lifting device with a minimum lifting capacity of
1,600 lbs. (726 kg.). Adjust the hoist so that it will
support the panel once the roller assembly and pivot
pin are removed, but not so tight that it changes the
position of the carrier panel.
3.
Summary of Contents for LEACH 2R-III
