![background image](http://html.mh-extra.com/html/federal-signal-corporation/leach-2r-iii/leach-2r-iii_service-manual_548517114.webp)
SECTION 9
9-19
SERVICE AND REPAIR
Remove capscrew and locknut (not shown) to re-
move retainer (1) and hinge pin (2).
Operate the lifting device and/or move the truck for-
ward to free the tailgate from the body.
Position the tailgate on supports as needed to fa-
cilitate repairs. The supports must be capable of
supporting 7,500 lbs. (3402 kg.).
5.
6.
7.
INSPECTION OF TAILGATE
Inspect all the sheet metal for bends, dents or tears.
Check the hardware holes for enlargement or
breaks in the metal. Check threaded holes for
stripped or otherwise damaged threads. Check the
tailgate seal for any sign of deterioration. Check
handles for looseness.
Replace any defective or worn part. Follow all safety
precautions pertaining to welding described in Sec.
1, SAFETY.
See Sec. 4, GENERAL REPAIR PRACTICES for
information pertaining to welding repairs.
1.
2.
3.
REASSEMBLY AND INSTALLATION
OF TAILGATE
Reassemble and install the tailgate in the approximate
reverse order of disassembly and removal.
1
2
Summary of Contents for LEACH 2R-III
