![background image](http://html.mh-extra.com/html/federal-signal-corporation/leach-2r-iii/leach-2r-iii_service-manual_548517125.webp)
SECTION 9
9-30
SERVICE AND REPAIR
REMOVAL OF PUSHOUT PANEL
OPERATIONAL STATUS
Truck Running
PTO Engaged
Speed Up On
Move the pushout lever rearward and position the
pushout panel at the extreme rear of the body.
Remove the tailgate lift cylinders as described ear-
lier in this section.
Remove the tailgate as described earlier in this sec-
tion.
Disconnect the telescopic pushout cylinder from the
pushout panel.
Weld an eye to the center of the panel and attach a
chain to prevent the panel from tipping over upon
removal.
The pushout panel can now be removed from the
body. The method of removal will depend on the
equipment available. Whatever method is used, the
equipment must be capable of lifting a minimum of
2800 lbs. (1270 kg.) and the panel should be se-
cured safely to the removal device.
OPERATIONAL STATUS
Truck Off
PTO Disengaged
1.
2.
3.
4.
5.
6.
PUSHOUT
LEVER
Summary of Contents for LEACH 2R-III
