FE FRENIC-Mini, Instruction Manual

Page: 88 / 218

5-11
(C codes continued)
Code Name Data setting range
Incre-
ment
Unit
Change
when
running
Data
copying
Default
setting
Refer
to
page:
C94 Jump Frequency 4 *1 0.0 to 400.0 0.1 Hz Y Y 0.0 –
C95 5 Y Y 0.0
C96 6 Y Y 0.0
C99 Digital Reference
Frequency *1 0.00 to 400.00 0.01 Hz – Y 0.00
P codes: Motor 1 Parameters
Code Name Data setting range
Incre-
ment
Unit
Change
when
running
Data
copying
Default
setting
Refer
to
page:
P02 Motor 1
(Rated capacity)
0.01 to 30.00
(kW when P99 = 0, 3, 4, 20 or 21)
0.01 to 30.00 (HP when P99 = 1)
0.01
0.01 kW
HP N Y1
Y2 See
Table A.
5-61
P03 (Rated current) 0.00 to 100.0 0.01 A N Y1
Y2 Rated
value of
Fuji
standard
motor
P04 (Auto-tuning) 0: Disable – – N N 0
1: Tune when the motor stops (%R1, %X)
2: Tune when the motor is rotating under V/f
control (%R1, %X, no-load current, slip
frequency).
P06 (No-load current) 0.00 to 50.00 0.01 A N
Y1
Y2
P07 (%R1) 0.00 to 50.00 0.01 % Y Y1
Y2
P08 (%X) 0.00 to 50.00 0.01 % Y Y1
Y2
Rated
value of
Fuji
standard
motor
P09 (Slip compensation gain
for driving)
0.0 to 200.0 0.1 % Y* Y 100.0 5-62
P10
(Slip compensation
response time)
0.01 to 10.00 0.01 s Y
Y1
Y2
1.00
P11 (Slip compensation gain
for braking)
0.0 to 200.0 0.1 % Y* Y 100.0
P12 (Rated slip frequency) 0.00 to 15.00 0.01 Hz N Y1
Y2
Rated
value of
Fuji
standard
motor
5-61
P60
Permanent magnet
synchronous motor *1
(Armature resistance)
0.00 (Disable PMSM),
0.01 to 50.00
0.01
Ω
Y
Y1
Y2
0.00 –
P61 (d-axis inductance)
0.00 (Disable high-efficiency control),
0.01 to 500.0
0.01 mH Y
Y1
Y2
0.00
P62 (q-axis inductance) 0.00 (Disable PMSM),
0.01 to 500.0 0.01 mH Y Y1
Y2 0.00
*1 The PMSM drive is available in the ROM version 0500 or later.