1-2
1.2 External
Views
(1) External
views
Figure 1.2 External Views of FRENIC-Mini
(2) Wiring
section
(a)
FRN0006C2S-2
(b)
FRN0010C2S-2
(* When connecting the RS-485 communications cable, remove the control circuit terminal block cover and
cut off the barrier provided in it using nippers.)
Note:
A box (
) in the above model names replaces A, C, E, or U depending on the shipping destination.
For three-phase 200 V class series of inverters, it replaces A or U.
Figure 1.3 Wiring Section
1.3 Transportation
• When carrying the inverter, always support its bottom at the front and rear sides with both hands.
Do not hold covers or individual parts only. You may drop the inverter or break it.
• Avoid applying excessively strong force to the terminal block covers as they are made of plastic
and are easily broken.
Barrier for the RS-485
communications port*
Control signal cable
port
Cooling
fan
L1/R, L2/S, L3/T, P1, P (+), N (-)
wire port
L1/R, L2/S, L3/T, U, V, W,
grounding wire port
DB, U, V, W,
grounding wire port
DB, P1, P (+) and N (-) wire port
Keypad
Main nameplate
Control circuit terminal bock cover
Control circuit
terminal block cover
Main circuit
terminal block
cover
Sub nameplate
Main nameplate
