FBI XL-1T, Installation And Setup Manual

Page: 43 / 72

Section 7 - System Programming
7–7
EUROPEAN RING DETECT - Use this option only if a European Telephone System is
used. The option changes the ring detection frequency used with automatic answer mode for
remote (Downloading) purposes according to the programmed ring count (see programming
question #07, location 2). If selected, the ring detection frequency range is 10-90 Hz. If not
selected, the frequency range is 16-90 Hz.
Question 05, L4
Rest Foll Loop, CS Test Ringback and Instant Arming
Default = C
Enter the digit from the table below.
Please note the checkmarks highlighting the selected options.
CS TEST KEYPAD RINGBACK
Digit
RESTORE
AFTER BELL
RESTORE
FOLLOWS LOOP
USER
ON-LINE SILENT AUDIBLE
INSTANT
ARMING
0
9 9
1
9 9 9
2
9 9 9 9
3
9 9 9 9
4
9 9 9
5
9 9 9
6
9 9 9 9
7
9 9 9 9
8
9 9
9
9 9
A
9 9 9
B
9 9 9
C
9 9
D
9 9
E
9 9 9
F
9 9 9
RESTORE AFTER BELL - Restores will be transmitted after the loop has returned to
normal after bell cutoff or upon system disarming, regardless of the loop state.
CS TEST RINGBACK SILENT - After a CS Test Report has reached the central station,
the sounder ringback will not be heard from the keypad indicating successful communication
with the CS.
INSTANT ARMING ENABLED - This option permits the INSTANT arming option
(INSTANT or STAY/INSTANT mode) to be used.
QUESTION 06
SYSTEM TIMEOUTS
DEFAULT = 665F
There are four locations (L1-L4) within this question defining various system-timing options
as follows:
Question 06, L1
Entry Delay 1
Default = 6
Enter the desired entry delay time. If zones 1 and 2 are delay zones, they follow entry delay
2. Refer to Entry Timeouts chart for valid choices. For UL applications, the maximum entry
delay should not exceed 45 seconds for household applications, or 15 seconds for commercial
burglary applications.