FBI XL-1T, Installation And Setup Manual

Page: 34 / 72

XL-1T Installation and Setup Guide
6–2
alarms as fast-blinking cone lights along with a fast-blinking ready (RDY) light. In both
keypad types (LCD and LED), the display will show the events starting from the oldest
event. Pressing the [#] key will advance the log to the most recent alarm in memory. To exit
from the system log view mode, press the [
✱
] key.
Please note that as the log is advanced, the LCD keypad will scroll through all zones that
were in alarm for the event. The system log cannot be cleared by the keypad. It can only be
cleared by the downloader software. On LCD keypads, the following appears:
ALARM MEM: ZN1
FRONT DOOR
TO EXIT THE SYSTEM LOG VIEW MODE: Press the [
✱
] key. However, if pressing the [
✱
]
key does not exit the System Log View, enter a valid User Code.
Installer Mode 3 (Unattended Download)
The Unattended Download function allows installation of the control panel. It also allows
the control panel to dial the telephone number of the CS downloading computer in order to
download the software without having the operator present. Basically, the CS downloading
computer telephone number will be programmed into the callback number (question 03), and
an identification number (the same as the account number in the download software) will be
programmed into the secondary telephone (question 02).
Unattended Download programming values are temporary since they will be reprogrammed after
downloading.
Unattended Download requires the following sequence:
1. The PC operator must select Unattended Download in the downloader software main
menu.
2. Enter Unattended Download mode: [CODE][
✱
] [INSTALLER][3].
3. The system will enter keypad programming at question 01. Enter the telephone number of
the CS downloading computer. Enter [#] after each digit (e.g., [1] [#] [2] [#] [3] [#]). Up to
12 digits can be entered. This phone number should be the same as the CS callback
number (question 03 from Keypad Programming, if the panel is programmed for callback).
4. Go to programming question 02 by entering the sequence [
✱
] [0] [2]. Enter the desired
account number, following each digit with [#]. The CS downloading computer will use this
data to determine the proper account information to download to the subscriber. The
account number must be six digits in length. The downloader’s account designator, not
the account number, will be communicated to the receiver. For ID's less than six digits
long, leading 0's must be entered (e.g., for ID 345 enter [0] [#] [0] [#] [0] [#] [3] [#] [4] [#]
[5] [#]).
5. Press the STAY button to exit Programming mode. The control panel will now dial the CS
telephone number entered in the callback number. If the Unattended Communications
option has not already been selected from the DS main menu, select it now. Upon
connection with the computer, the customer account number programmed in step 3 will be
uploaded, and the system will perform the desired download operation.