XL-1T Installation and Setup Guide
5–4
Only the Master User (User 1) can program or modify other User Codes. Therefore, do not
misplace this code. Should the master User Code be misplaced, a User Code default must be
performed. Refer to Section 6: Installer Modes.
NOTE:
User 1 - programs all User Codes (1-6). It cannot be deleted.
NOTE:
User 6 - can be programmed as an Ambush Code, if there is an ambush CS
Transmission Code programmed into question #17, locations 1 and 2. In this mode, entry
of the User 6 code will ARM or DISARM the system and transmit the Ambush Code to the
central station. Furthermore, if opening/closing by user reporting is programmed, User 6
will be reported along with the Ambush Code. If no CS code is defined in question #19,
user number 6 will be a normal User Code.
TO ADD OR CHANGE USERS, PRESS
[CODE] [USER] [USER #] [USER ID]
Where:
[CODE]
CODE button
[USER]
Master User ID Code (user 1)
[USER #]
User to be programmed (1-6)
[USER ID]
Four-digit User Code. (Valid digits are 0-9.)
Example: Define user 3 with an ID of 7493. (Assume the master User Code is 1234.)
[CODE] [1234] [3] [7493]
An acknowledgment sound (steady tone) verifies successful User Code
programming. A negative acknowledgment sound (four short tones) indicates
unsuccessful programming.
If additional user programming is necessary, repeat the procedure listed above. If a dialing
format that transmits opening/closing by user ID is programmed, each user will report the
respective user number.
User Code programming can be performed only while the system is DISARMED.
User Deletion
User Codes (2 - 6) can be deleted directly through the keypad. Once deleted, their values will
be null.
TO DELETE USERS, PRESS
[CODE] [USER] [USER #] [
✱
]
Where:
[CODE]
CODE button
[USER]
Master User ID Code (User 1)
[USER #]
User number to be deleted (2-6).
NOTE: User 1 cannot be deleted, but it can be changed.
[
✱
]
[
✱
] key
Keypad Emergency Conditions
The system has the ability to transmit keypad emergency conditions as follows:
CONDITION
KEYSTROKES
ENABLED IN
AUDIBLE OR SILENT
PANIC
[#] and [
✴
]
(at the same
time)
Question #05, location 1
Question #04, location 4
Summary of Contents for XL-1T
