FBI XL-1T, Installation And Setup Manual

Page: 40 / 72

XL-1T Installation and Setup Guide
7–4
For more information on CS reporting formats refer to
Appendix A
at the back of this manual.
Question 04, L4 Default = 1
K.P. Panic, CS Split Reporting, Cancel Bell Ringback and System Bell Test
Enter the digit for the desired system options from the table below.
Please note the checkmarks highlighting the selected options.
Digit
KEYPAD PANIC
Audible Silent
SWINGER
SHUTDOWN
CANCEL BELL
RING BACK
SYSTEM BELL
TEST
0
9
1
9
2
9 9
3
9 9
4
9 9
5
9 9
6
9 9 9
7
9 9 9
8
9 9
9
9 9
A
9 9 9
B
9 9 9
C
9 9 9
D
9 9 9
E
9 9 9 9
F
9 9 9 9
KEYPAD SILENT/AUDIBLE PANIC - Determines whether the keypad panic condition (
✱
and # on the keypad) will activate the bell and the keypad buzzer. In either case, a signal will
be transmitted to the central station, if a Panic Code has been programmed.
The keypad panic condition can be activated through question #05, location 1.
SPLIT REPORTING - The split reporting option will direct all opening and closing signals
to the secondary receiver telephone number. All other conditions (alarms, troubles, restores
etc.) will adhere to the reporting route described in question 01. If split reporting is selected
the secondary receiver telephone number must be programmed.
CANCEL CODE BELL RINGBACK - If audible, the bell will ring back for 1 second when
the Cancel Code is sent, provided that some other transmission would not cancel this event
(e.g., silent panic). If silent, the bell will not ring back.
BELL TEST - If this option is selected, the bell will be activated for one second upon
successful arming. This option is required for UL Commercial Burglary applications.