manualshive.com logo in svg

FARGO electronics DTC400e, User Manual

Share
Download
FARGO electronics DTC400e User Manual Download Page 96

RESTRICTED USE ONLY

 

 

Fargo Electronics, Inc.

 

DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.0) 

4-49

Resolving the Excessive Resin printing problems 

All Troubleshooting procedures assume that only factory-authorized supplies are in use in 
the Printer.  

Step Procedure 

1 

Review the following information.  

•

 

Symptom:

  Black resin text and barcodes appear smeared or too thick. 

•

 

Printer Error State:

  None 

•

 

Driver Monitor Error Display:

  None 

2 

Reduce the Resin Heat setting within the Image Color

 

tab of the Printer Driver. 

See the Using the Image Color tab (C30e/M30e). 

 

 

 3 

Reduce the Image Darkness.  

 

Summary of Contents for DTC400e





























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands