manualshive.com logo in svg

FARGO electronics DTC400e, User Manual

Share
Download
FARGO electronics DTC400e User Manual Download Page 75

RESTRICTED USE ONLY

 

 

Fargo Electronics, Inc.

 

DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.0) 

4-28

Resolving a Wrong Ribbon Error  

All Troubleshooting procedures assume that only factory-authorized supplies are in use in 
the Printer.  

Step Procedure 

1 

Review the following information.  

•

 

Symptom:

  Printer errors out as soon as it receives data from the PC. 

•

 

Printer Error State:

  The Ribbon installed does not match the Printer 

Driver information. 

•

 

Driver Monitor Error Display:

  Wrong Ribbon Installed 

 

 

 2 

Verify the Driver settings are correct. 

a.  Open the Printer Control Panel from the Computer. 

•

  If using Windows 2000/XP, right click on the DTC400e/C30e/M30e 

Card Printer and select 

Printing Preferences

.    

b.  Click on the Device Option tab.  

c.  Click on the 

auto select

 button. 

d.  Check that the Ribbon type matches the Ribbon selected. 

3 

Press on the 

Resume

 button. 

If the issue persists, continue to Step 4. 

Summary of Contents for DTC400e





























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands