manualshive.com logo in svg

FARGO electronics DTC400e, User Manual

Share
Download
FARGO electronics DTC400e User Manual Download Page 77

RESTRICTED USE ONLY

 

 

Fargo Electronics, Inc.

 

DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.0) 

4-30

Resolving a Card Jam Error  

All Troubleshooting procedures assume that only factory-authorized supplies are in use in 
the Printer.  

Step Procedure 

1 

Review the following information.  

•

 

Symptom:

  Card is jammed. 

•

 

Printer Error State

:  Card TOF Sensor is detecting no card motion. 

•

 

Driver Monitor Error Display:

  Card Jam 

 

 

 2 

Look for a jammed card in the Printer. 

a.  Open the Printer’s front cover. 

b.  Remove the Ribbon Cartridge from the Printer. 

c.  Check to see if a card is jammed in the print station of the Printer. 

d.  If a card is found in the print station, continue to Step 3. 

e.  If no card was found in the print station, continue to Step 4. 

3 

Clearing a jammed card. 

a.  If a card is jammed in the Printer, use the 

Cancel button

 and the 

Pause

 

button

 to move the Feed Rollers and free the card. 

b.  The card can then be fed out of the Printer. 

Summary of Contents for DTC400e





























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands