manualshive.com logo in svg

FARGO electronics DTC400e, User Manual

Share
Download
FARGO electronics DTC400e User Manual Download Page 114

RESTRICTED USE ONLY

 

 

Fargo Electronics, Inc.

 

DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.0) 

5-8

Telnet Command 

Command Purpose 

Command Format 

 

from 

Restore the network settings 
from either the default 
settings or the current 
settings. 

store net from 
default|current 

mode 

Specify the Ethernet 
interface mode as: 
automatic, full or half duplex; 
10 or 100 mHz.  

store ifc mode 
auto|10half|10full|100half|1
00full 

 

ifc  

from 

Set the Ethernet mode 
settings from the default or 
current settings. 

store ifc from 
default|current 

save 

Save all current settings as 
the stored settings in the 
permanent memory. 

save 

load 

Take the settings from the 
stored memory and make 
them the current settings. 

load 

lpstat 

Display information about 
the Printer status.  

This includes the status and 
device response.  

See the Printer web page 
description. 

lpstat 

cancel 

Cancel a specific print job 
from the print queue. 

cancel 10 

quit 

Stop the current Telnet 
session. 

quit 

    

Summary of Contents for DTC400e





























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands