manualshive.com logo in svg

FARGO electronics DTC400e, User Manual

Share
Download
FARGO electronics DTC400e User Manual Download Page 254

RESTRICTED USE ONLY

 

 

Fargo Electronics, Inc.

 

DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.0) 

7-16

 

 

 

Using the Erase Temperature Offset 

Step Procedure 

1 

Adjust the Erase temperature for the rewriteable cards as needed. 

•

 Increase 

the 

Current Setting

 to cause more heat to be used in the 

erasing process. 

OR 

•

 Decrease 

the 

Current Setting

 to cause less heat to be used in the 

erasing process. 

(

Note:

  Erase Temp Offset provides user ability to control the Printhead heat 

level when the Erase Operation is performed. Appropriate heat levels should 
be applied for the proper erase process. This setting should be adjusted for 
proper erasure)  

Summary of Contents for DTC400e





























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands