manualshive.com logo in svg

FARGO electronics DTC400e, User Manual

Share
Download
FARGO electronics DTC400e User Manual Download Page 57

RESTRICTED USE ONLY

 

 

Fargo Electronics, Inc.

 

DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.0) 

4-10

 

Resolving the Mag Verify Error  

All Troubleshooting procedures assume that only factory-authorized supplies are in use in 
the Printer.  

Step Procedure 

1 

Review the following information.  

•

 

Symptom:

  The Printer is unable to verify encoded data. 

•

 

Printer Error State:

  The Printer is unable to verify encoded data. 

•

 

Driver Monitor Error Display

:  Mag Verify

 

Error 

 

 

 2 

Check to ensure that the cards are loaded with the Magnetic Stripe facing Up 
and towards the front of the Printer.  

3 

a.  Press on the 

Resume

 button. 

b.  If the error continues continue to step 4 

4 

Verify the Driver settings if cards are loaded properly. See the Using the 
Magnetic Encoding tab (Persona C30e/M30e) procedure. 

5 

Verify that data is being encoded to the Magnetic Stripe.  

a.  Clear any Error Messages by unplugging the Printer and reapplying power. 

b.  Remove the failed card.  

c.  Use a Magnetic Stripe reader or magnetic developer spray to determine if 

Summary of Contents for DTC400e





























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands