manualshive.com logo in svg

FARGO electronics DTC400e, User Manual

Share
Download
FARGO electronics DTC400e User Manual Download Page 192

RESTRICTED USE ONLY

 

 

Fargo Electronics, Inc.

 

DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.0) 

6-68

 

 5 

a.  Print the card design and observe how the image is oriented on the card as 

it ejects from the Printer. (

Note:

  The location of a defined area is based on 

the card orientation as it exits the Printer.)  

b.  Measure the defined area location based on the printed card. (

Note:

  If 

selecting the 

Rotate Front 180 Degrees

 option, the image will appear 

upside down as it exits the Printer.)  

c.  Position the defined area opposite to the measurement of the onscreen 

card design (which will appear right side up). 

 

Y=0.3“

X=1.3“

Karen Atkins

Access Level-2
ID# 1234478

 

 6 

•

  Determine whether to use the 

Front

 option (via the 

Front

 radio button) or 

Summary of Contents for DTC400e





























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands