manualshive.com logo in svg

FARGO electronics DTC400e, User Manual

Share
Download
FARGO electronics DTC400e User Manual Download Page 253

RESTRICTED USE ONLY

 

 

Fargo Electronics, Inc.

 

DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.0) 

7-15

This will erase the full card. The card may be stored or printed on again.) 

 

  

 

Using the Erase Intensity Option (DTC400e/C30e)  

Step Procedure 

1 

This setting is used only when the 

None-Re-Writable

 ribbon option is selecting 

in the driver Devise Options tab.  This option takes the place of the Overlay Heat 
(O) options in the driver when None RE-Writable is selected. 

•

  Increasing this value will aide the erasing properties when using this 

process repeatedly on the same card. More intensity may be needed to 
fully erase these cards.  

Summary of Contents for DTC400e





























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands