manualshive.com logo in svg

FARGO electronics DTC400e, User Manual

Share
Download
FARGO electronics DTC400e User Manual Download Page 211

RESTRICTED USE ONLY

 

 

Fargo Electronics, Inc.

 

DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.0) 

6-87

Selecting the Defined Area(s) function (Front and Back options) 

To define an area, refer to the following steps: 

Step Procedure 

1 Click 

Defined Area(s)

. (

Note:

  This will activate the card grid in the upper half 

of the window. It is through this card grid that up to five areas can be defined.)  

When the card grid is first activated, a small square will appear at its default 
size of .2" x .2" / 5mm x 5mm and at its default location in the lower left-hand 
corner (0, 0). This square represents the first defined area.  

(

Note:  

Changing the orientation of the card in the Card Tab will change the 

appearance of this Tab.) 

 

 

 

 2 

a.  Determine the area of the card necessary to define. In the sample 

(below), this area is indicated by the dashed outline.  

b.  Determine the size of this area by actually printing a card and looking at it 

in the same orientation as when it exits the Printer. 

Summary of Contents for DTC400e





























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands