manualshive.com logo in svg

FARGO electronics DTC400e, User Manual

Share
Download
FARGO electronics DTC400e User Manual Download Page 71

RESTRICTED USE ONLY

 

 

Fargo Electronics, Inc.

 

DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.0) 

4-24

Resolving a Ribbon Out Error  

All Troubleshooting procedures assume that only factory-authorized supplies are in use in 
the Printer. (

Note:  

Using the printer in direct sunlight may adversely affect the ribbon sensor 

integrity.)  

Step Procedure 

1 

Review the following information.  

•

 

Symptom:

 Printer will not print. 

•

 

Printer Error State:

 The Ribbon Sensor has detected the End of Ribbon 

mark. 

•

 

Driver Monitor Error Display:

 Ribbon Out 

2 

Replace the Ribbon Cartridge 

a.  Press on the 

Resume

 button. 

 

 

 

Summary of Contents for DTC400e





























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands