manualshive.com logo in svg

FARGO electronics DTC400e, User Manual

Share
Download
FARGO electronics DTC400e User Manual Download Page 81

RESTRICTED USE ONLY

 

 

Fargo Electronics, Inc.

 

DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.0) 

4-34

Resolving a Headlift Motor or Sensor Error 

All Troubleshooting procedures assume that only factory-authorized supplies are in use in 
the Printer.  

Step Procedure 

1 

Review the following information.  

•

 

Symptom:

 The Printhead continuously cycles or does not cycle at all. 

•

 

Printer Error State:

 Headlift Sensor is not detecting movement from the 

Headlift Cam. 

•

 

Driver Monitor Error Display:

 Headlift Error 

 

 

 

 2 

Press the 

Cancel Print

 button on the Driver Monitor Error Display Message. 

3 

Reboot the Printer by cycling the power. 

4 

Cycle the Headlift Motors.  

a.  Use the Fargo Diagnostic utility to cycle the Printhead to ensure proper 

printhead operation.  

a.  Verify that the Headlift Motor turns. 

Summary of Contents for DTC400e





























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands