manualshive.com logo in svg

FARGO electronics DTC400e, User Manual

Share
Download
FARGO electronics DTC400e User Manual Download Page 250

RESTRICTED USE ONLY

 

 

Fargo Electronics, Inc.

 

DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.0) 

7-12

Selecting the NONE- Re-Writable Ribbon Type 
DTC400e/C30e 

Follow these instructions: 

Caution:  

No Ribbon is used with these cards. Do not load a Ribbon into the printer when 

using this process. Printing on the Re-Writable card with a Ribbon will ruin the card.  

•

  The default setup is for the printer to first erase the previously-printed card; then write the 

NEW information on the card. (

Note:

  If you are printing to a NEW card, select WRITE 

ONLY. This will speed up the process. The FULL card is erased and printed; there is no 
option to select specific areas to erase.)  

•

  To print/erase a certain section use the “Overlay/Print Area” tab in the driver. Select the 

specific area in the same manner as the print job with the color ribbon.  

•

  To erase many cards, use the Fargo Workbench Re-Writable Card Eraser option. (

Note:

  

This option does not print only erase.) 

 

    

 

 

 

 

Summary of Contents for DTC400e





























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands