manualshive.com logo in svg

FARGO electronics DTC400e, User Manual

Share
Download
FARGO electronics DTC400e User Manual Download Page 191

RESTRICTED USE ONLY

 

 

Fargo Electronics, Inc.

 

DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.0) 

6-67

•

  Determine the area of the card needed to define for a signature panel with 

a different size and location than the Driver's standard 

Omit Signature 

Area

 setting. (

Note:

  This area is indicated by the dashed outline.) 

•

  Determine the area size by actually printing a card and looking at it in the 

same orientation as when it exits the Printer. 

 

3 

Measure the total size of the desired area and enter those dimensions into the 
dimension boxes.  (

Note:

  The minimum size an area is .2" x .2" / 5mm x 

5mm.)

 

 

.35“

1.9“

Karen Atkins

Access Level-2
ID# 1234478

 

 4 

Measure from the lower left corner of the card up and over to the lower left 
corner of for the defined area to begin and enter these values into the X and Y 
boxes. (

Note:

  The card grid lines are spaced at .2 inch / 5mm intervals.)

 

 

Summary of Contents for DTC400e





























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands