- 10 -
Mi 2570
I
TALIANO
E
NGLISH
F
RANÇAIS
E
SP
AÑOL
P
ORTUGUÊS
D
EUTSCH
2. FUNCTION OF THE KEYS
The 4 frontal keys allow accessing the functions and the settings of the device and vary their function
depending on the operating mode of the video intercom. The keys can be used in two different ways:
1)
short press
(under 2 seconds)
2)
long press
(over 3 seconds).
Attention.
During the pressing of a key, a dissuasion or busy tone warnings that the function
is not available because
the service is not active or the video intercom line is busy by
another user
.
Long press: > 3 seconds
>3 Sec.
2.1 Function of the keys in the different operating modes of the video intercom
Depending on the operating mode, the keys of the video intercom carry out the following functions:
Short
press
Long
press
Short
press
Long
press
Short
press
Long
press
Short
press
Long
press
Key
Operating Modes
Execute a Monitoring function
; if planned on the system diagram, the video intercom switches ON in the last external station where
a call was made.
Enable/disable the “Silent” function
: exclusion of the ringtone and the tones of the device. When the
"silent"
function is enabled
and the video intercom is ON, the icon
flashes (see paragraph
3.2.3
).
Standby
Monitoring
Ringing
Conversation
Close the contact between terminal CII
and terminal PII
or, if appropriately configured on the video intercom and planned on the
system wiring,
Executes a second Monitoring function
(see
Adjustments
paragraph).
Operate the Electrical Lock
of the last external station that has carried out a call.
No operation.
Ringtones programming (see par
-
agraph
3.2.1
).
Programming of ringtone volume
(see paragraph 3.2.2).
Close the Conversation
with the
external station.
Programming of audio conversa
-
tion volume (see paragraph
3.1
).
Enable the Conversation
with the external station.
Short press: < 2 seconds
<2 Sec.
