Fantic INTEGRA 150 TRAIL, User And Maintenance Handbook

Page: 82 / 101

06
Ed. 1 - 07/2019
T1
2 sec.
1
sec.
EN
G
LI
SH
EN_22
U s i n g p o w e r a s s i s t e d p e d a l l i n g
1. GETTING STARTED
This paragraph summarizes the most important information necessary for a correct use of the power-assisted
pedalling system.
- Make sure that the battery pack is fully charged (see paragraph “4” of this section).
When charging the battery, it may be re-
moved or left in its housing on the bicycle.
- Make sure that the connector is correctly con-
nected to the battery.
-
Turn the assisted pedalling system on,
by keeping the button “T1” pressed for
more than 2 seconds.
The display will show the starting page,
then it’ll pass to the main page.
- Select the assistance level.
- The EPAC bicycle is ready for use.
- To turn off the assisted pedalling system, keep
the button “ T1 ” pressed for more than 2 sec-
onds.
- After a certain period of inactivity (approx. one
hour), the assisted pedalling system enters
“ SLEEP ” mode.
- To restart the system, it is necessary to press button “
T1
” on the tool twice (at intervals of one second).