Fantic INTEGRA 150 TRAIL, User And Maintenance Handbook

Page: 91 / 101

07
Ed. 1 - 07/2019
EN
G
LI
SH
EN_31
C l e a n i n g a n d M a i n t e n a n c e
· Remove any excess lubricant from the chain
using a clean, dry lint-free cloth.
- Clean the wheel rims and brake disks using a suit-
able degreasing product (consult your vendor).
Do not use motorcycle chain lu-
bricants on your bicycle as this
will cause the chain and gear
change components to jam. Use
ONLY lubricants that are specifi-
cally indicated for bicycle chains.
- Manually remove any remaining dirt using a
clean, lint-free cotton cloth and a suitable de-
tergent.
- Spray the entire bicycle using a wax spray or
similar protective product.
- Wait until the reaction time indicated on the
specific product has elapsed, the polish your
bicycle using a clean, lint-free cotton cloth.
- Clean the brake disks manually, using a clean,
dry lint-free cotton cloth and a suitable de-
greasing product.
The presence of wax spray or
other protective products on the
brake disks will significantly
reduce the braking efficiency of
your bicycle.
Clean the brake disks using a
suitable degreasing product.
Consult the vendor.
- The following components must not be treat-
ed with protective products:
- brake shoes;
- brake disks;
- hand grips, brake and gear change levers;
- saddle;
- tyres.
4. PARKING YOUR BICYCLE
When the bicycle is resting on its
stand or against a wall, fence or
railings, even the slightest con-
tact may cause it to tip over. This
may result in injuries to persons
or animals and damage to prop-
erty.
Park your bicycle only in a posi-
tion where it does not constitute
an obstacle.
Keep children and animals away
from the bicycle when it is
parked.
Do not park your bicycle close to
objects that are easily damaged,
such as motor vehicles, etc.
How to park your bicycle correctly:
- Position the bicycle on a flat, stable surface.
- When the bicycle is stationary, lower the stand
using your right foot until it clicks into place.
- Rotate the handlebars so that they are facing
slightly to the left.
- Gently tilt the bicycle to the left until it reaches
a stable position.
- Check that the bicycle is stable.
- Hold the bicycle still with one hand by grasp-
ing it lightly by the handlebars or the saddle
and, using the other hand, strike it gently in
either direction in the area of the saddle. If it
seems that the bicycle may fall over, move it to
a more stable position.