Bulb Replacement – Read Carefully!
Take care when replacing the bulb in order not to damage the bulb connection.
1.
Disconnect headlamp from battery pack.
2. To remove the bulb, carefully unthread the lens cap. Do not allow the
bulb to rotate. It may be necessary to press down gently on the bulb
lens while unthreading the cap.
3. Unplug the used bulb and discard it.
4. To install the bulb, first insert the two prongs of the retainer clip into the
larger holes on the ceramic socket. Next, insert the bulb lead wires into
the smaller holes in the socket.
5. Rethread lens cap onto housing. Make sure the lens cap thread is fully
engaged with the housing. Do not plug the lamp into the battery until
this step is complete.
Thank you for purchasing a
ViewPoint™ Dual Pro light sys-
tem. All ViewPoint™ light sys-
tems are constructed of the
highest quality materials, such
as cold-forged aluminum hous-
ings, heavy duty cords with
strong positive-click connections, and
halogen bulbs with dichoric glass reflectors. Your
ViewPoint™ Dual light system produces a clean light
pattern for optimum visibility and is easily recharged for
continued night riding enjoyment.
Please save these instructions, as they contain impor-
tant information for taking care of your ViewPoint
™
Dual light.
Installation and Use
Note:
Be sure to fully charge battery before first use (see the
following section for details).
1. Slide the battery into your waterbottle cage, and make sure it is secure.
2. Install the headlight assembly onto your handlebar so that the headlight
is positioned over the stem.
3. Open the Quick Release Clamp, close the clamp around your bar, rotate
the Quick Release Lever into position on the upper part of the clamp
(with the lever pointing up) and then flip the Quick Release Lever down-
ward to lock the clamp into position (see Figure 1).
4. If the clamp diameter setting is too loose or too tight, open the quick
release lever, loosen or tighten the lever as necessary to adjust clamp
tightness, and close the lever to check for a secure grip on the bar.
Owner’s Manual
DUAL PRO
Performance, Inc.
One Performance Way
Chapel Hill, NC 27514
PerformanceBike.com
Assembled in USA
For technical support, call 1-800-727-2453 from 9am - 6pm Monday through Friday.
Bulb
Lens Cap
Assembly
Bulb Retainer Clip
Exploded View
ONLY ONE LAMP
SHOWN FOR CLARITY
Ceramic Socket
