Fagor 8040 MC CNC, Manual

Page: 131 / 247

Chapter 4 - page 3
MC work mode
4.2 SEE CONTENT OF A PROGRAM
To see the content of a part-program, select this with the pointer from the left-hand column. To do
this use and
If the part-program is formed on an MC mode cycle basis, the right -hand column will display the
cycles which said part consists of:
If you press or or the pointer goes on to the right-hand column.
Now keys and let the pointer be moved over the blocks or cycles which make up the part.
To sum up, use keys:
and to move up and down in each one of the columns
and to change the column
After selecting an operation, the CNC allows:
Seeing the operation in detail
Erasing the operation
Moving the operation to another position
Modifying the operation
4.2.1 SEEING THE OPERATIONS IN DETAIL
After selecting the operation required, with the pointer, press
The CNC will display all the data for said operation.
Now you can:
Simulate the operation. (See the chapter on "Execution and Simulation").
Execute the operation. (See the chapter on "Execution and Simulation").
Modify the operation
Store the operation. Replace the previous one or including this as a new one.
4. Storage of programs
4.2 See content of a program
4.2.1 Seeing the operations in detail