Fagor 8040 MC CNC, Manual

Page: 176 / 247

Self-teaching Manual
Chapter 3 Page 13
MC Model Hands-on training
3.4.1 Handwheels.
– Select the jog mode with the selector switch. ( position).
Jog table
Handwheel Selector switch
– Jog the axes with the handwheels.
• If the machine has 1 handwheel:
Select an axis with the JOG keys.
The machine moves the axis as the handwheel is being turned.
• If the machine has 2 or more handwheels:
The machine moves an axis with each handwheel.
NOTE: Refer to the Operation Manual Chapter 3 Section 3.4.3
S W I T C H
P O S I T I O N
D i s t a n c e p e r l i n e o f
t h e h a n d w h e e l d i a l
1 1 m i c r o n .
1 0 1 0 m i c r o n .
1 0 0 1 0 0 m i c r o n .