Fagor 8040 MC CNC, Manual

Page: 65 / 247

Chapter 2 - page 3
MC work mode 2. Operating in JOG mode
2.1 Introduction
6.- This window displays, in large characters, the tool number «M» selected.
The offset number «D» associated with the tool. If the tool number and the offset number
coincide, the CNC will not display value «D».
The coordinates for the tool change point referred to home. The CNC does not display this
window when text 47 of program 999997 is not defined.
7.- This window shows all the details of the spindle :
* The actual spindle speed "S".
* The condition of the spindle. This is represented by an icon and can be turning to the right,
to the left or idle.
* The % of the spindle speed being applied.
* The active spindle range.
* The range of the active spindle. The CNC does not display this information when text 28 of
program 999997 is not defined.
8.- Whenever a work cycle is accessed, the CNC shows the help text associated with the icon
selected in this window.
This help text must be defined in P999997 program and be written in the desired language.
The format and the points to be considered in the P999997 program are detailed in Chapter on
"General concepts".
9.- Reserved.