Fagor 8040 MC CNC, Manual

Page: 108 / 247

Chapter 3 - page 24
MC work mode
Circular pocket cycle (level 1)
One must define The center coordinates (Xc, Yc), the pocket radius (R) and the machining
conditions in Z (Zs, Z, P, I, Fz)
In the area for roughing data, define the lateral penetration angle (
β
), the milling
pass (
∆
) and the machining direction
In the area for finishing data, define the lateral penetration angle (
θ
), the finishing
stocks (
δ
and
δ
z
), the number of finishing passes (N) and the machining
direction
Circular pocket cycle (level 2)
Useful for machining pre-emptied pockets
or rings
One must define The center coordinates (Xc, Yc), the inside radius (Ri), the outside radius (Re)
and the machining conditions in Z (Zs, Z, P, I, Fz)
In the area for roughing data, define the lateral penetration angle (
β
), the milling
pass (
∆
) and the machining direction
In the area for finishing data, define the lateral penetration angle (
θ
), the finishing
stocks (
δ
and
δ
z
), the number of finishing passes (N) and the machining
direction
3. Work with operations or cycles
3.7 Rectangular and Circular Pocket cycles
CIRCULAR POCKET 1
CIRCULAR POCKET 2
FINISHING
ROUGING