manualshive.com logo in svg

Fagor 8040 MC CNC, Manual

Share
Download
Fagor 8040 MC CNC Manual Download Page 75

Chapter 2 - page 13

MC work mode

2.

Operating in JOG mode

2.5

Tool control

2.5   TOOL CONTROL

The standard screen for MC operating mode displays the following information about the tool.

This window displays the following information:

> In large characters, the number "T" of the selected tool.

> The offset number  «D» associated with  the tool.

> The coordinates for the tool change point.

The CNC does not display this window when text 47 of program 999997 is not defined.

To select any other tool take the following steps:

1st

Press  

The CNC will frame the tool number

2nd

Enter the tool number to be selected

To exit the selection process press 

3rd

Press 

  key for the CNC to select the new tool.

The CNC will handle the tool change

Summary of Contents for 8040 MC CNC
























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands