Fagor 8040 MC CNC, Manual

Page: 134 / 247

Chapter 4 - page 6
MC work mode 4. Storage of programs
4.6 Modifying a part-program
4.6 MODIFYING A PART-PROGRAM
To modify a part-program the following steps must be taken:
* Press to access the list of part-programs stored.
* Use the pointer to select from the left-hand column the part-program you wish to modify.
After selecting the program, the CNC lets you:
Erase an operation
Move an operation to another position
Add or insert a new operation
Modify an already existing operation.
4.6.1 ERASING AN OPERATION
To erase an operation follow these steps:
* Use the pointer to select the operation to be erased, in the right-hand column.
* Press
The CNC will display a message at the bottom, requesting the confirmation of the erasing
operation.
If you press the CNC will erase the operation selected and update the right-hand
column.
If you press the operation is not erased and the erasing operation is left.
4.6.2 MOVING AN OPERATION TO ANOTHER POSITION
To move an operation to another position take the following steps:
* Use the pointer to select the operation to be moved from the right-hand column.
* Press
The CNC will display this operation in highlighted text.
* Place the cursor after the operation which the operation is to be moved to and press
Example: You have Your want
1.- Bidirectional Surface Milling in X 1.- Bidirectional Surface Milling in X
2.- Rectangular Pocket 2.- Circular Pocket
3.- Circular Pocket 3.- Drilling 1 + Positioning in line
4.- Drilling 1 + Positioning in line 4.- Drilling 1 + Positioning in Grid
5.- Drilling 1 + Positioning in Grid 5.- T Positioning in Grid
6.- T Positioning in Grid 6.- Rectangular Pocket
7.- Profile 1 7.- Profile 1
Select the "Rectangular Pocket" and press
Move the cursor onto the "T Positioning in Grid" and press