Fagor 8040 MC CNC, Manual

Page: 84 / 247

Chapter 2 - page 22
MC work mode 2. Operation in JOG mode
2.8 ISO code management
2.8 ISO CODE MANAGEMENT
The ISO key gives access to the MDI mode or to the ISO work mode.
To access the MDI mode, the JOG mode must be selected and then press
The CNC displays a window at the bottom of the standard (or special) screen.
In this window, an ISO-coded block may be edited and then executed just like in MDI mode of the
"M model" work mode
To access the ISO mode, press once while working with operations or cycles or twice when in
the JOG mode.
When accessing the ISO mode, a special screen comes up where up to 6 program blocks may be
edited in ISO code or in high level language.
Example: [ISO]
G95 G96 S120 M3
G0 Z100
G1 X30 F0.1
Once the desired block or blocks have been edited, press , The upper right-hand side of the
screen will display the symbol.
From this moment on, the edited blocks may be simulated, executed or stored like any other operation
or cycle.
Press to simulate and to execute.
It is possible to combine blocks edited in ISO code with machining cycles (standard and/or user
defined) to make up part-programs. The chapter on "Program storage" describes how to do it and how
to operate with them.
To store blocks edited in ISO code, press