Fagor 8040 MC CNC, Manual

Page: 122 / 247

Chapter 3 - page 38
MC work mode
3.13.1 MULTIPLE POSITIONING AT RANDOM POINTS
To associate this positioning with an operation, press
Up to 12 points can be defined. Coordinates (X1, Y1) .... (X12, Y12)
When not using all 12 points, the first unused point must be defined with the same coordinates as
those of the last point.
Point definition
The coordinates are defined one by one. After placing the cursor over the axis coordinates, one can:
a) Enter the value by hand. Key in the desired value and press
b) Assign the current axis position.
Jog the axis to the desired point with the handwheel or the JOG keys. The upper right-hand window
shows the tool position at all times.
Press for the selected data to assume the value shown in the upper right-hand window.
Press
3. Work with operations and cycles
3.13 Multiple positioning
3.13.1 Multiple positioning at ramdom points