Fagor 8040 MC CNC, Manual

Page: 35 / 247

N
EW
F
EATURES
(S
OFT
M: 7.
XX
)
Page 31 of 48
80
40 CNC
Oscilloscope
function
CNC machine parameters that may be modified
When defining the CNC machine parameters, that could be changed
to adjust the machine, use the following nomenclature:
Machine parameters of an axis: Indicate the axis and the parameter
number separated by a dot. Examples: [X.P18], [Z.P23]
Spindle machine parameters: Indicate the spindle (S, S1, S2) and
the parameter number separated by a dot. Examples: [S.P18],
[S1.P23], [S2.P25]
Drive machine parameters that may be modified
When defining the drive machine parameters, that could be changed
to adjust the machine, use the following nomenclature:
Number Parameter Update
P14 BACKLASH Immediate
P18 ACCTIME Beginning of the next block
P19 INPOSW Immediate
P23 PROGAIN Immediate
P24 DERGAIN Immediate
P25 FFGAIN Immediate
P27 MINANOUT Immediate
P28 SERVOFF Immediate
P29 BAKANOUT Immediate
P30 BAKTIME Immediate
P37 MAXVOLT Immediate
P38 G00FEED Beginning of the next block
P59 ACCTIME2 Beginning of the next block
P60 PROGAIN2 Immediate
P61 DERGAIN2 Immediate
P62 FFGAIN2 Immediate
P67 JERKLIM Beginning of the next block
Number Parameter Update
P2 MAXGEAR1 Beginning of the next block
P3 MAXGEAR2 Beginning of the next block
P4 MAXGEAR3 Beginning of the next block
P5 MAXGEAR4 Beginning of the next block
P18 ACCTIME Beginning of the next block
P19 INPOSW Immediate
P23 PROGAIN Immediate
P24 DERGAIN Immediate
P25 FFGAIN Immediate
P27 MINANOUT Immediate
P28 SERVOFF Immediate
P37 MAXVOLT1 Immediate
P38 MAXVOLT2 Immediate
P39 MAXVOLT3 Immediate
P40 MAXVOLT4 Immediate
P45 OPLACETI Immediate
P47 ACCTIME2 Beginning of the next block
P48 PROGAIN2 Immediate
P49 DERGAIN2 Immediate
P50 FFGAIN2 Immediate
Note: A modification in the MAXGEAR1/2/3/4 parameters sets the
square corner mode even if a round corner has been
programmed.