Fagor 8040 MC CNC, Manual

Page: 95 / 247

Chapter 3 - page 11
MC work mode
3.4 SURFACE AND SLOT MILLING MILLING OPERATIONS
Press to select these operations.
Surface milling operation:
One must define The type of milling, the starting point (X1, Y1), the dimensions of the surface to
be milled (L, H, E) and the machining conditions in Z (Zs, Z, P, I, Fz)
On the other hand, one must define the milling step (
∆
) in the data area for the
roughing operation and the finishing stock (
δ
z
) in the data area for the finishing
operation.
Slot milling operation:
One must define The type of slot milling, the starting point (X1, Y1), the dimensions of the slot to
be milled (L, H, E) and the machining conditions in Z (Zs, Z, P, I, Fz).
In the roughing area, define the milling step (
∆
) and the machining direction
In the finishing area, define the finishing stocks (
δ
and
δ
z
), the number of
finishing passes and the machining direction
3. Work with operations or cycles
3.4 Surface and slot milling operations
SLOT MILLING
ROUGHING
FINISHING