manualshive.com logo in svg

Fagor 8040 MC CNC, Manual

Share
Download
Fagor 8040 MC CNC Manual Download Page 81

Chapter 2 - page 19

MC work mode

2.

Operating in JOG mode

2.5

Tool control

2.5.2

Tool calibration

Select the bottom left window using the 

 

 

 

Key in the Z coordinate of the part used for calibration and press 

Tool measurement. Length only.

Approach the tool to the part and touch it with it.

Press 

  

The tool is now calibrated. The CNC assigns the length "L" corresponding to it and resets its "K"
field to "0".

The tool radius "R" has to be entered manually.

To calibrate another tool:

Select at the machine: 

 number 

Approach the tool to the part and touch it with it.

Then, 

 

2.5.2.3

MODIFY  VALUES  WHILE IN EXECUTION

The tool values (dimensions and geometry) may be modified without having to interrupt program
execution.

To do this, press 

 , the CNC will show the Tool Calibration screen with all the data corresponding

to the active tool being possible to change its data or that of any other tool.

To exit this screen, press 

Summary of Contents for 8040 MC CNC
























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands