Factory Five Racing '33 Hot Rod, Assembly Manual, Page: 549 / 710

548
www.factoryfive.com 508-291-3443
Measure
3
/
8
” out from the line drawn and draw another line down the length of the door. Check the length
of the cut out using both the edge of the glass and one of the pre cut window wipe rubber pieces.
Cut the outer lines marked using a jigsaw or air saw. Check to make sure that the glass will fit in the
length of the hole. If necessary cut a little more on the length.

The next step must be done carefully. The rubber window wipe pieces have steel in them. If you
kink the part by accident it will never look the same.