Factory Five Racing '33 Hot Rod, Assembly Manual

Page: 17 / 710

16
www.factoryfive.com 508-291-3443
Optional part Instructions
Part instructions for all Factory Five parts and options can be found online at:
www.factoryfiveparts.com/instructions/
Tools and Supplies List
The following lists detail the tools and supplies that are needed to build your kit. The “helpful” items are
not crucial to the assembly but make life easier. Home Depot HUSKY
®
, Sears CRAFTSMAN
®
, and
Snap-On

tools are all guaranteed for life and we’ve found them to be reliable tools.
Storage Shelves for kit and running gear parts
Body storage area (can be outside)
SAE and metric socket set, a 52-piece set is a good choice
Deep sockets for some common sizes are helpful.
SAE Combination wrench set (⅜”-
15
/
16
”)
Metric combination wrench set (7mm – 24mm)
A set of standard and Phillips head screwdrivers
Standard and Metric Hex key sets
Long nose pliers, 4.5”
Snap ring pliers
Tin Snips
Drill
Drill bits (#30, #11,
3
/
32
”-½” standard drill bits)
Caulk gun
Dead Blow hammer
Razor knife
Wire stripper/crimping tool
Bench top vise
6” C-Clamps
Tape measure or straight edge ruler/T-square
Hydraulic floor jack
Engine hoist
6’
5
/
16
” chain (to lift engine)
4 Jack stands
3
/
16
”, ¼”,
5
/
16
” Fuel/brake line bender (hand held)
Jig saw (Body cut outs)
Torque wrench (Click style, ⅜” or ½”drive)
Eye protection
Bucket