14
15
C4000I
22
532100 - Rev.A
1
2
12 -16
Tr
ansla
tion of the original instruc
tions
ENGLISH
1.5
5.3 INSTALLING THE RACK
RISKS
PERSONAL PROTECTIVE EQUIPMENT
The instructions for installing the rack are not supplied.
Install the rack following the instructions given in the
specific manual.
In order to prevent damage to and the proper op-
eration of the gearmotor, the following conditions
must be met:
-
there must be a distance of 1.5 mm between the
teeth of the rack and the teeth of the pinion over
the entire stroke (
14
-1)
-
the rack sections must not be welded together or
to the spacers
-
the rack must slide within the width of the pinion
along its entire length (
14
-2)
-
there must be no friction
Do not use grease or other lubricants between the
rack and the pinion.
5.4 INSTALL THE CABLE GLANDS
RISKS
PERSONAL PROTECTIVE EQUIPMENT
1. Unscrew the enclosure cover screws.
2. Remove the cover.
3. Drill out the blank holes for the cable glands on
the enclosure using a Ø 16 mm drill bit.
!
Make a hole for the encoder cable using a Ø 12 mm
drill bit.
4. Fit the cable glands provided into their seats
15
.
5. Screw the cable glands onto the enclosure as far
as they will go.
Place only one cable into each cable gland.
