![background image](http://html1.mh-extra.com/html/faac/c4000i/c4000i_original-instructions-manual_3190522020.webp)
C4000I
20
532100 - Rev.A
Tr
ansla
tion of the original instruc
tions
ENGLISH
5. MECHANICAL INSTALLATION
5.1 TOOLS REQUIRED
6
Symbols: tools (type and size)
6-8...
HEX WRENCH of the specified size (6, 8...)
6-8...
ALLEN KEY with ROUND HEAD of the specified size
(6, 8...)
6-8...
FLAT-HEAD SCREWDRIVER of the specified size (6, 8...)
6-8...
CROSS-HEAD SCREWDRIVER of the specified size (6, 8...)
6-8...
TORX SCREWDRIVER of the size indicated (6, 8...)
ELECTRICIAN'S SCISSORS
WIRE STRIPPERS
6-8...
METAL DRILL BITS of the specified size (6, 8...)
TOOL with TORQUE ADJUSTMENT
Where necessary for safety, a torque wrench with the
specified tightening torque will be shown.
FASTENING TORQUE VALUE
The torque wrench and the tightening torque in Nm is
shown in the figures. E.g.: SPANNER 6 set at 2.5 Nm
6
2.5
Nm
!
The installation must comply with Standards EN 12453 and EN 12445.
Mark off the work site and prohibit access/transit.