C4000I
40
532100 - Rev.A
Tr
ansla
tion of the original instruc
tions
ENGLISH
removal) to the BUS 2easy devices.
Registration procedure:
1. Select
parameter
bu
in Basic programming. When
F
is released, the display shows the status of the
BUS 2easy devices (
).
2. Press and hold down the
+
and
-
buttons simulta-
neously for at least 5 seconds until
Y
appears (the
display flashes during this time). Registration has
been completed.
3. Release
the
+
and
-
buttons. The display shows
the status of the BUS 2easy devices
4. Check the status of the LEDs on the board:
LED DL7 (Red) - BUS 2easy devices
At least one device is engaged/active
No device is engaged/active
LED DL3 (Green) - BUS 2easy line
Line monitoring. LED always on (off with board in Sleep
mode)
Line short-circuited
Device error: check the ERROR LED
Board in Sleep mode
Registered device verification procedure:
1. Select
parameter
bu
in Basic programming. After
registering one or more devices,
b u
displays
segment 13 on.
2. Press
the
+
button and keep it pressed; the seg-
ments relative to the registered devices will come
on. Each segment of the display corresponds to
a type of device:
1
Open A control device
2
Open B control device
3
Closing photocells
4
Photocells for Open impulse
5
Opening and closing photocells
6
Close control device
7
Opening photocells
8
Stop control device
9
Closing edge
10
Not used
11
Not used
12
Opening edge
13
BUS 2easy status
14
Not used
8. 8.
13
5
12
11
1
2
14
7
6
8
10
3
4
9
no
No device registered
cc
BUS 2easy line short-circuited
Er
BUS 2easy line error
