12
13
11
C4000I
21
532100 - Rev.A
13
30
Nm
Tr
ansla
tion of the original instruc
tions
ENGLISH
5.2 INSTALLING THE GEARMOTOR
RISKS
PERSONAL PROTECTIVE EQUIPMENT
1. Fit the screw and nut onto the height adjustment
system
11
. Loosely tighten the screw by hand.
2. Place the gearmotor in the installation column so
that the holes match up with the cage nuts
12
.
!
DO NOT lift the motor by the cables. Support it from
its base.
3. To make the following steps easier, the gearmotor
can be kept at the fixing height by loosening the
fastening screw until it rests on the ground.
4. Fix the gearmotor to the column making sure
that you fit the washer and the split washer in the
correct order
13
.
!
Use the torque wrench to tighten to the torque shown
in the figure.
