XTP CrossPoint Series • Operation
71
Configuration Worksheets
Rather than trying to remember the configuration for each preset, use worksheets to record
this information. Make copies of the blank worksheet on page 74 (XTP CrossPoint 3200)
or page 75 (XTP CrossPoint 1600) and use one for each preset configuration. Cross out
all unused or inactive inputs and outputs. Use different colors for video and audio.
NOTE:
All of the equipment in the following examples is connected through the
appropriate input board, output board, transmitter, or receiver.
Worksheet Example 1: System Equipment
Figure 52 shows a portion of a worksheet for an XTP CrossPoint 1600 in a fictional
organization with the system hardware annotated. Inputs 10, 11, and 13 have no
connection in this organization, so they are crossed out on the worksheet. Similarly,
outputs 7 and 9 through 16 are crossed out.
1
2
3
4
5
6
7
8
1
9
10
11
12
13
Input sources
Output destinations
Preset #
Title:
Video:
Audio:
Fill in the preset number and use colors, dashes, etc., to make connecting lines.
Indicate if the configuration is for video, audio, or both.
Weekly status mtg
3
Camera
#2
Camera/
mic - Main
podium
Main hall
FP #1
Main hall
FP #2
Podium
monitor
Sound
system
#1
Sound
system
#2
VCR
(VSC 500)
DA 6
VTG 400
14
15
16
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Classroom
#1 BluRay
DVS 605
Audio
CD
PC 2
RGB-HDMI
300A
PC 1
RGB-HDMI
300A
Classroom
#2 BluRay
DVS 605
Laptop Streaming
(DVS 605)
Figure 52.
Worksheet Example 1: System Equipment
Inputs include PCs, an audio CD player, cameras, and an Extron VTG 400DVI. Output
devices include monitors, projectors, a stereo, a VCR for recording presentations, and a DA.
The VTG 400DVI video test generator connected to input 12 enables a video test pattern to
be sent to one, several, or all output devices for problem isolation or adjustment purposes.
An audio test tape or CD could be used in a similar manner to check out the audio
components.
