Extron electronics XTP CrossPoint 3200, User Manual

Page: 57 / 167

XTP CrossPoint Series • Operation 49
1. Press the
Esc
button to clear any input buttons, output buttons, or control buttons that
may be lit.
2. Press and hold the
Audio
button until the button begins to blink red to enter Audio
mode. Release the button.
3. Press and release an input button to select an input that has analog audio. The output
buttons display the audio level for the selected input; the more output buttons lit, the
greater the gain or attenuation.
•
Green output buttons indicate a gain (+) audio level.
•
Red output buttons indicate an attenuation (–) level.
Audio gain and attenuation is displayed differently on different models.
•
XTP CrossPoint 3200 — Each output button indicates 1 dB when lit steadily
(see the table on the next page).
•
XTP CrossPoint 1600 — Each output button indicates 1 dB when blinking and
2 dB when lit steadily (see the table on page 51).
4. Press and release the
Esc
( > ) and
View
(
<
) buttons to increase and decrease the audio
level.
5. Press and release the
Audio
button to exit the Audio mode. The
Audio
button stops
blinking.
NOTES:
• Pressing the
Enter
or
Preset
button also exits Audio mode. Pressing the
Preset
button changes to Recall Preset mode.
• There is one level setting per analog audio input. The audio level setting is
shared by the left and right audio inputs.
• The audio level settings are stored in non-volatile memory. When power is
removed and restored, the audio level settings are retained.
• Exiting Audio mode by pressing the
Audio
button always returns the I/O
configuration to video and audio selected for configuration (the
Video
and
Audio
buttons lit).