Extron electronics XTP CrossPoint 3200 User Manual Download Page 151

Page: 151 / 167

XTP CrossPoint Series • HTML Operation

143

XTP Power Page

The

XTP Power

page provides a location to enable and disable PoX for all XTP inputs and

outputs. Access the

XTP Power

page by clicking the

XTP Power

link (see figure 72,

) on

the left of the

Set and View Ties

Input Adjustments

Output Adjustments

EDID

Configuration

, or

Presets

page.

Select (check) and deselect (uncheck) the

Enable Power

box (

) to enable and disable

PoX.

NOTES:

•

PoX is supplied by the XTP CrossPoint 48 V power supply.

•

XTP CrossPoint 1600:

•

Can power up to 28 total (input and output) endpoints at up to 364 watts.

•

Is available with optional 48 V power supply redundancy.

•

XTP CrossPoint 3200:

•

Can power up to 24 total (input and output) endpoints at up to 312 watts.

•

No 48 V power supply redundancy is available.

Figure 72.

XTP Power Page

Summary of Contents for XTP CrossPoint 3200








































































































































































Search results

Summary of Contents for XTP CrossPoint 3200

Reviews:

Related manuals for XTP CrossPoint 3200

Brands by name

Popular brands

Extron electronics XTP CrossPoint 3200, User Manual

Search results

Summary of Contents for XTP CrossPoint 3200

Reviews:

Related manuals for XTP CrossPoint 3200

Brands by name

Popular brands