XTP CrossPoint Series • Operation
40
The current configuration (see figure 32) is now:
•
Video
— Input 5 video is tied to output 1, output 3, output 4, and output 8.
•
Audio
— Input 5 audio is tied to output 3, output 4, and output 8.
Input 5 video tied
to outputs 1, 3, 4, and 8
Input 5 audio tied
to outputs 3, 4, and 8
Input
Output
1
3
4
8
5
Video
Audio
Figure 32.
Final Configuration, Example 2
Example 3: Remove a tie from a set of ties
In the following example, an existing tie is removed from the current configuration. The
example shows the front panel indications that result from your actions.
NOTE:
This example assumes that you have performed
on page 38 and
on page 39.
1.
Clear all selections
: Press and release
Esc
.
2.
Select audio only for the tie
: Press and release
Video
and
Audio
as necessary to
light Audio only.
I / O
VIDEO AUDIO
Press the
Video
button to toggle on and off.
The button is
unlit or background illuminated
when deselected.
Press the
Audio
button to toggle on and off.
The button lights
red when selected.
3.
Select an input
: Press and release
Input 5
.
INPUTS
1 2 3 4 5 6 7 8 15 16
OUTPUTS
1 2 3 4 5 6 7 8 15 16
The
Output
1
button
does not light to indicate the tie
created in example 2 because that tie is
video only.
The
Outpu
t
3
,
Output
4
, and
Output
8
buttons light
red to indicate the audio ties created in example 1.
Press the button.
The button lights
red.
